There are not standardization of fault codes can and do vary from manufacturer to manufacturer, even between models from the same manufacturer these codes may well be different. This guide is designed only as a generalized guide and is not intended to replace your owners manual, if you have problems always check the owners manual first, it may well have the information you need and will be specific to your Appliance. Au web site assume no responsibility for any action you may undertake as a result of using this guide.

Failure Code - glass link Electronic Range Control (ERC)	Condition	Check/Repair
Door flashing #0, 1, 2, 3	Latch switch broken	Replace
Lock flashing	Latch switch broken	Replace
F0	Loss of safety signal	Replace adapter board
F1	Watchdog circuit	Replace Electronic Range Control (ERC)
F2	Oven too hot	Replace oven temperature sensor
F3 F4	Open or shorted oven temperature sensor	Replace oven temperature sensor
F7	Shorted touch panel	Replace glass panel
F9	Motorized door	Check latch
FF	Lock error	Check switch and motor
Electronic Range Control (ERC) III / Relay board with separate board / push buttons
F0	Shorted push pad	Replace
F1	Failed Electronic Range Control (ERC)	Replace
F2	Oven too hot	Replace oven temperature sensor
F3 F4	Shorted or open oven temperature sensor	Replace oven temperature sensor
F5, F6, F8	Failed Electronic Range Control (ERC)	Replace ERC
F7	Shorted or sticking button	Check glass alignment, replace touch panel if necessary
F9	Door latch failure	Replace door latch switch or assembly if necessary

Shop by Category

Shop by Brand

Fault-Codes Diagnostics Amana Ranges

Fault Codes Definder

Fault Codes