Fault Codes

        Admiral  Range/Stove/Oven
 

There are not standardization of fault codes can and do vary from manufacturer to manufacturer, even between models from the same manufacturer these codes may well be different. This guide is designed only as a generalized guide and is not intended to replace your owners manual, if you have problems always check the owners manual first, it may well have the information you need and will be specific to your Appliance. Au web site assume no responsibility for any action you may undertake as a result of using this guide.

 button-details.gif

 

Failure
Code
Condition
Check/Repair
F1
Defective touch pad or membrane
Replace touch pad or clock assembly (also called the ERC) (usually the touch pad)
F1
Watchdog on board
Replace touch pad or clock assembly (also called the ERC)
F2
Oven too hot
Replace relay board (if present) or oven temperature sensor
F3 or F4
Open or shorted oven temperature sensor
Replace oven temperature sensor
F5
Hardware and watchdog circuits disagree
Replace clock assembly (also called the ERC)
F6
Missing AC signal
Check for proper voltage
F7
Function key shorted or stuck button
Replace touch pad or clock assembly (also called the ERC) or un-stick button
F8
Analog/Digital trouble
Replace clock assembly (also called the ERC)
F9
Door latch trouble
Check door lock circuit or replace clock assembly (also called the ERC)
F0
Function key stuck
Replace touch pad or clock assembly (also called the ERC)